Products: Hydraulics: Coolers: PFC3





















Pump/Filtration/Water Cooler Units
PFC3 Series
Worksheet

Contact Information:
If You are not a HYDAC Distributor, Please fill out the RIGHT Column.
If you are a HYDAC Distributor, Be sure to include the Customer E-mail.
Customer E-mail is a REQUIRED field and must contain a valid e-mail,

Distributor:

Company Name:
Distributor Contact:

 Customer Contact:
Distributor Phone:

 Customer Phone:
Distributor Fax:

 Customer Fax:
Distributor E-mail:

 Customer E-mail:

Critical Sizing Data:
The following basic information is needed for the proper sizing and ordering of a PFC cooler unit. For more details, see page 6 of the PFC literature.

Heat Load To Be Removed: (BTU/hr)
Note: BTU = HP x 2545
Oil Type: (ISO VG or SAE grade)
Oil Flow: (GPM or PFC pump)
Desired Oil Temperature: (°F)
Water Flow: (GPM)
Note: Water flow is generally based upon a 4:1 ratio of oil:water to start with.
Inlet Water Temperature: (°F)

Filter Data:

Filter Type:
MF 180 LF 500 Other None  
Micron Rating:
2 3 5 10 20
Filter Clogging Indicator:
BM
Visual with
Manual Reset
29 psi
72 psi

C
Electrical
Switch
29 psi
 72 psi

D24
Electrical Switch
& 24 VDC Lamp
29 psi
 72 psi 		D115
Electrical Switch
& 115 VAC Lamp
29 psi
 72 psi 		D230
Electrical Switch
& 230 VAC Lamp
29 psi
 72 psi

Note: For more detailed information about clogging indicators, see the HYDAC indicators Catalog.


 
PFC Series Main | Specifications/Engineering Data