hydraulic troubleshootingdiagnosing hydraulic systemsportable data recorderProducts: Electronics: Diagnostic Equipment




















Diagnostic Equipment
HMG 500 & 3000
Series

HMG 500 Series
The HMG 500 Portable Data Recorder is a hand-held measuring unit for simple measuring tasks on hydraulic and pneumatic systems. Typical applications are in
analysis, maintenance and service. The HMG 500 has two analog input channels and can record the signals from
HYDAC HSI sensors which are connected to it. HSI sensors (HYDAC Sensor Interface) are HYDAC sensors for pressure, temperature, and flow rate with automatic sensor recognition.
The HMG 500 automatically reads the measuring range and unit from each sensor that is connected. Manual adjustments of the measuring range settings are no longer required.
The measured values, actual, minimum and maximum, are recorded from the sensors. Depending on the requirement and setting, the following are displayed: the actual measured values (channel A, B), the minimum or the maximum values (channel A, B). The min/max values can be reset at any time at the touch of a button.
Furthermore the HMG 500 is capable of measuring and displaying the differential between the values on channel A and B (channel A - B).

HMG 3000 Series
The HMG 3000 data recorder is a portable unit for simple
measurement and data capturing tasks involving hydraulic
and pneumatic systems. Applications extend primarily to
maintenance and servicing, troubleshooting and test stands, as well as, quality inspecting.
The HMG 3000 can concurrently evaluate signals up to 10
sensors. The unit features 5 input jacks for connecting the
sensors; if necessary this number can be doubled using a Y adapter for measurement operations involving more than 5 sensors. HYDAC offers matching HSI sensors (HSI = HYDAC Sensor Interface) for pressure, temperature and flow rate which are automatically recognized by the HMG 3000. Standard HYDAC sensors can also be used. However, these sensors do not feature any automatic sensor detection, consequently the initial setup has to be entered by hand.

 


Download HMG 500 Series (211 K)

Download HMG 3000 Series (671 K)

Electronics

Home | About Us | Products | Applications | Distributors | Brochures
Tech Support | HYDAC News | Employment | Contact Us