RFL Casted
Pressures to 360 psi • Flows to 350 gpm

• Two part construction makes it possible to arrange the inlet and outlet either one above the other on one side or, by turning the base part through 180°, on opposite sides of the housing.
• Inlet/outlet ports for the models 851 and 1301 comply with SAE-4 bolt flange Code 61 configuration.
• Clogging indicators have no external dynamic seal. High reliability is achieved and magnetic actuation eliminates a leak point.

Download RFL Brochure (251 K)

RFL Welded
Pressures to 230 psi • Flows to 3900 gpm

• 1 to 10 elements required
• Several connection sizes for each filter provide maximum connection flexibility eliminating additional adapters and intermediate flanges.
• Clogging indicators have no external dynamic seal. High reliability is achieved and magnetic actuation eliminates a leak point.

Download RFL Welded Brochure (192 K)

RFLD Casted
Pressures to 580 psi • Flows to 340 gpm

• 2 elements required
• Inlet and outlet connections are available with SAE or NPT connections, where applicable.
• Transfer valve and pressure equalization line allows easy changeover between filter housing without costly system shutdown.
• Clogging indicators have no external dynamic seals. High reliability is achieved and magnetic actuation eliminates a leak point.

Download RFLD Brochure (350 K)

RFLD Welded
Pressures to 230 psi • Flows to 3900 gpm

• 1 to 10 elements required
• Several connection sizes for each filter provide maximum connection flexibility eliminating additional adapters and intermediate flanges.
• Transfer valve and pressure equalization line allows easy changeover between filter housing without costly system shutdown.
• Clogging indicators have no external dynamic seal. High reliability is achieved and magnetic actuation eliminates a leak point.

Download RFLD Welded Brochure (784 K)